One SET of FOUR individualising valves, to enable each displacer of a hydrolastic or hydragas suspension to be individually set up and adjusted.

These NEW units are a direct replacement for the hose assembly typically used on MGFs and "K" series Metros and allows different pressures to be applied to each displacer.

Each individualising valve is pressure tested on our test rig to 1500psi, well in excess of the system operating pressure and this ensures these are completely leak free.

Each is supplied with an integral "O" ring seal and does NOT require the use of PTFE tape or sealants, and each is fitted with the standard Schrader type valve and a quality plated brass valve cap with its own seal.